2.00mm Box Header 90° H=6.40 Connectors

The mechanical properties of the connector are in terms of the connection function, and the insertion force is an important mechanical property. The insertion force is divided into the insertion force and the extraction force (the extraction force is also called the separation force), and the requirements of the two are different. There are insertion force and separation force regulations in the relevant standards, which indicates that the insertion force is small from the point of view of use (thereby having a low insertion force LIF and a structure without ZIF insertion), and if the separation force is too small, Affect the reliability of contact. The insertion force and mechanical life of the Dongguan connector are related to the coating quality (sliding friction coefficient) of the contact structure (positive pressure) and the dimensional accuracy (alignment) of the contact arrangement.

   SPECIFICATION
Current Rating:                       2.0Amp
Insulation Resistance:            1000MΩ  min
Contact Resistance:               20MΩ  max
 Withstand Voltage:                500V AC/DC
Operating Temperature:         -40°C  to  +105°C
Contact Material:                    Brass
Contact Plating:                      Au or Sn Over Ni
Insulator Material:                  PA6T+30%GF UL 94V-0