Solder Cup Waterproof D-Sub Connector

The Solder Cups D-sub connector, also known as Solder Cups  D-sub connector , typically contains a pin layout of 9 pin, 15 pin, 25 pin, 37 pin & 50 pin positions housed in increasing shell sizes accordingly. They are available in both male (plug) and female (socket) variants with the male signal contacts/pins (current rating of 5A) spaced every 2.76mm in horizontal rows and the spacing of rows vertically at 2.84mm laid out half the distance between pins of existing rows.

IP66 IP67 Rated Waterproof D-Sub Panel Mount Solder Connectors
Harsh outdoor or indoor environments can destroy electronic equipment. Standard D-sub connectors are not intended to withstand contaminants such as water and dust. These waterproof solder cup connectors are available in male or female genders and DB9, DB15, DB25, and HD15 sizes. They will accommodate wire ranges from 30 - 20 AWG. Construction features gold plated brass contacts, nickel plated steel shells, and a silicone insulating ring. Maximum recommended panel thickness is 0.078".

Antenk offer a wide range of waterproof Standard Density and high density male and female high density D-Sub connectors solder cup  with stamped and formed Contacts in cable mount used in a variety of demanding applications.

Antenk's Solder Cup D-Sub Connectors Stamped contacts

FEATURES

Solder cup d-subs available in industry sizes/positions

Low cost economy series.

Nickel shells have indents to provide grounding and additional retention.

Low cost & high performance, non-removable stamped contacts.

Optional mounting hardware available.

Antenk's SOLDER CUP D-SUB CONNECTORS Stamped contacts

MATERIALS

Shell: Steel, Tin or Nickel Plated

Insulator: Glass-filled thermoplastic. U.L. rated 94V-O

(230°C process temp)

Stamped contacts: Male pins - Brass | Female pins - Phosphor bronze

Plating: Gold flash on entire contact (contact us for other plating options)